- The cause and treatment of severe emulsification of oil and water in electric desalting tank and large amount of cut water with oil
-
The reason:1. The injection amount of demulsifier is not suitable, and the wide spectrum of...
06-17
- The reason and treatment method of large amount of water in electrodesalted crude oil
-
The reason and treatment method of large amount of water in electrodesalted crude oilCauses...
06-17
- The causes of transformer tripping of electric desalting tank and the measures taken
-
Reasons for transformer trip of electric desalting tank:1 The oil-water interface of the...
06-17
- Adjusting principle of temperature of crude oil electric desalting
-
The temperature of electric desalting is an important control parameter of electric desalting...
06-17
- The reason and adjusting method of electric desalting cutting water oil
-
Reasons for electric desalination to cut water oil:1 The oil-water boundary of the electric...
06-17
- The reason and adjustment method of the large fluctuation of voltage and current during the operation of electric desalting
-
The reasons for the large fluctuation of voltage and current during the operation of electric...
06-17
- The reason and adjustment method of high water content of crude oil after stripping
-
Reasons for high water content of dehydrated crude oil:1 Mixing valve pressure drop is too...
06-17
- Factors affecting desalting rate of crude oil and adjustment methods
-
Factors affecting the desalting rate of crude oil:1 The pressure drop of the mixing valve is...
06-17
- Normal operation of crude oil electric desalting
-
1. Daily operation and inspection of electric desalting(1) Check whether the desalting tank...
06-17
- Instructions for starting and stopping operation of electric desalting of crude oil
-
1. Start operation of electric desalting(1) Preparation1 Notify the maintenance unit such as...
06-17
